AMIGA-RESISTANCE

Die Projektseite für alles rund um den Amiga
Aktuelle Zeit: 27 Feb 2020, 20:28

Alle Zeiten sind UTC


 

 

 



Ein neues Thema erstellen  Auf das Thema antworten  [ 3 Beiträge ] 
Autor Nachricht
BeitragVerfasst: 28 Nov 2009, 16:33 
Offline
Administrator
Benutzeravatar

Registriert: 30 Aug 2005, 19:42
Beiträge: 4908
Postleitzahl: 46047
Land: Deutschland
Wohnort: 46047 Oberhausen
ACube hat für das Sam440ep Board die U-Boot Version 1.3.1a veröffentlicht.
Dies sind die Änderungen:


Bassano del Grappa, 27 Nov 2009

ACube Systems is pleased to announce the release of a new version of U-Boot firmware for its line of motherboards Sam440ep and Sam440ep-flex.
This version addresses a number of problems and add some features and optimizations making it possible to cut down boot time by 3-12 seconds depending on the configuration of the board.

What's new in this version (for both versions):

* faster graphic card initialization, now it takes half the time than previous U-Boot version
* unified the first two countdowns, for an even faster boot
* solved compatibility issues with some Radeon 9200 and 9250 gfx cards
* reworked preference menu

Sam440ep miniITX version:

* a Radeon HD 2400 graphic card could be now used as secondary gfx card
"http://www.acube-systems.biz/download/S ... 091127.zip"

Sam440ep-flex version:

* added support for Silicon Motion 502 graphic card
* added experimental support for Catweasel MK4 controller
* a Radeon HD 2400 graphic card could be now used in both 33 and 66 Mhz PCI slots

"http://www.acube-systems.biz/download/S ... 091127.zip"

Additional information:

Please note: UBoot and UBoot updater makes use of GPL code and thus are both published under GPL

. The sources can be downloaded from:

* "http://www.acube-systems.biz/index.php? ... ware&pid=1"
* "http://www.acube-systems.biz/index.php? ... ware&pid=2"

or, using a direct link, from:

* "http://www.acube-systems.biz/download/u ... rod.tar.gz"

ACube U-Boot V1.3.1a

_________________
Gruß Helmut
Amiga 2000, Amiga 500, Amiga One XE, Amiga One X5000


Nach oben
   
BeitragVerfasst: 16 Apr 2010, 15:53 
Offline
Administrator
Benutzeravatar

Registriert: 30 Aug 2005, 19:42
Beiträge: 4908
Postleitzahl: 46047
Land: Deutschland
Wohnort: 46047 Oberhausen
15 Apr 2010 23:20:00 GMT+1
U-Boot 1.3.1b for Sam440ep released
Bassano del Grappa, 15 April 2010

ACube Systems is pleased to announce a new release of the U-Boot firmware for its line of motherboards Sam440ep and Sam440ep-flex.

What's new in this version (for both versions):

solved a graphic glitch when booting from SD card (or USB mass-storage device)
inverted ESC and SPACE actions at the boot countdown, now ESC brings to the U-Boot prompt and SPACE brings to the preference menu.
 

Additional information:

Please note: UBoot and UBoot updater makes use of GPL code and thus are both published under GPL.

The sources can be downloaded from:

http://www.acube-systems.biz/index.php? ... ware&pid=1
http://www.acube-systems.biz/index.php? ... ware&pid=2
 

or, using a direct link, from:

http://www.acube-systems.biz/download/u ... rod.tar.gz

_________________
Gruß Helmut
Amiga 2000, Amiga 500, Amiga One XE, Amiga One X5000


Nach oben
   
BeitragVerfasst: 18 Apr 2011, 09:27 
Offline
Administrator
Benutzeravatar

Registriert: 30 Aug 2005, 19:42
Beiträge: 4908
Postleitzahl: 46047
Land: Deutschland
Wohnort: 46047 Oberhausen
Fri, 15 Apr 2011
UBoot 2010.06-05 for Sam460ex available

Bassano del Grappa, Italy - 15, Apr 2011

ACube Systems is pleased to announce a new release of the U-Boot firmware for its line of motherboards Sam460ex.

What's new in this version:

* improved Radeon X1550, X1650, X1950 setup
* fixed a bug in the PCI-E setup which cures a crash when both a gfx card and an USB3 card were used
* DDR2 boost setup is now disabled by default, to enable it, set ddr2_boost to 1 from the U-Boot prompt
* removed a debug output from ext2fs.c



The updated installation guide describes in detail the usual installation method (ISO image) and alternative methods (TFTP). Inside the archive you will find both the ISO image and the TFTP updater

You can download installation archives from:

* http://www.acube-systems.biz/index.php? ... ware&pid=5


Additional information:

Please note: UBoot and UBoot updater makes use of GPL code and thus are both published under GPL.

The sources can be downloaded from:

* http://www.acube-systems.biz/index.php? ... ware&pid=5



or, using a direct link, from:

* http://www.acube-systems.biz/download/u ... rod.tar.gz

_________________
Gruß Helmut
Amiga 2000, Amiga 500, Amiga One XE, Amiga One X5000


Nach oben
   
Beiträge der letzten Zeit anzeigen:  Sortiere nach  
Ein neues Thema erstellen  Auf das Thema antworten  [ 3 Beiträge ] 

Alle Zeiten sind UTC


Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder


Du darfst keine neuen Themen in diesem Forum erstellen.
Du darfst keine Antworten zu Themen in diesem Forum erstellen.
Du darfst deine Beiträge in diesem Forum nicht ändern.
Du darfst deine Beiträge in diesem Forum nicht löschen.
Du darfst keine Dateianhänge in diesem Forum erstellen.

Gehe zu: 

cron