AMIGA-RESISTANCE

Die Projektseite für alles rund um den Amiga
Aktuelle Zeit: 28 Mär 2024, 14:23

Alle Zeiten sind UTC


 

 

 



Ein neues Thema erstellen  Auf das Thema antworten  [ 1 Beitrag ] 
Autor Nachricht
BeitragVerfasst: 09 Dez 2008, 10:54 
Offline
Administrator
Benutzeravatar

Registriert: 30 Aug 2005, 19:42
Beiträge: 5303
Postleitzahl: 46047
Land: Deutschland
Wohnort: 46047 Oberhausen
U-Boot 1.3.1 for Sam440ep released


Bassano del Grappa, 08 Dec 2008

ACube Systems is pleased to announce the release of a new version of U-Boot firmware for its line of motherboards Sam440ep. With this new release a number of problems have been fixed together with the adding of Dual Graphic Cards support.

What's new in this version:

* U-Boot can enable at the same time the onboard M9 and an external PCI gfx board. This allows the use of an additional gfx card under OS4.1 for example (tested with a 9250 and 7000 PCI cards)
* implemented the "reset" command
* fixed the "ide reset" command
* introduced a new uboot var "scan_usb_storage" to scan for USB mass storage devices (disabled by default)
* reworked menu and removed unused items

Additional information:

Dual booting of Linux and AmigaOS 4.1 will be possible with the new SLB that is currently under betatesting.

Enabling the output on the external PCI gfx card may take a few seconds longer from within U-Boot.

On the PCI gfx card, U-Boot will enable VGA output and VGA-over-DVI output. Digital DVI output doesn't work correctly right now (the monitor will show an out of range message) but become usable when the OS loads and correct the settings.

To use OS4.1 with a two gfx cards setup, you can download the following files:

* PCIGraphics
* PCIGraphics.info

(put them into DEVS:Monitors)

* Picasso96Settings

(put into DEVS:)

Use Picasso96Mode to fine tuning the settings to your needs.

UBoot 1.3.1 updater
Dual Graphic Card support

ACube News

_________________
Gruß Helmut
Amiga 2000, Amiga 500, Amiga One XE, Amiga One X5000


Nach oben
   
Beiträge der letzten Zeit anzeigen:  Sortiere nach  
Ein neues Thema erstellen  Auf das Thema antworten  [ 1 Beitrag ] 

Alle Zeiten sind UTC


Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder


Du darfst keine neuen Themen in diesem Forum erstellen.
Du darfst keine Antworten zu Themen in diesem Forum erstellen.
Du darfst deine Beiträge in diesem Forum nicht ändern.
Du darfst deine Beiträge in diesem Forum nicht löschen.
Du darfst keine Dateianhänge in diesem Forum erstellen.

Gehe zu: 

cron