AMIGA-RESISTANCE

Die Projektseite für alles rund um den Amiga
Aktuelle Zeit: 28 Mär 2024, 09:44

Alle Zeiten sind UTC


 

 

 



Ein neues Thema erstellen  Auf das Thema antworten  [ 1 Beitrag ] 
Autor Nachricht
 Betreff des Beitrags: Expansion Systems - Dataflyer 2000s
BeitragVerfasst: 19 Mär 2009, 18:19 
Offline
Administrator
Benutzeravatar

Registriert: 07 Aug 2005, 19:05
Beiträge: 2134
Postleitzahl: 29640
Land: Deutschland
Wohnort: Schneverdingen
Zitat:
Hello.

After being amaized at the wealth of information available on the amiga
hardware site - I thought that it should point out that Expansion
Systems did produces the Dataflyer 2000s, it was a Zorrow II full length
card and had room for 8 simms and 1 x 3.5 inch scsi 2 drive onboard - it
also had an internal scsi 2 header and an external scsi HI-D scsi 2 socket.

I know it exists because I owened one - however it suffered with
compatability issues with the CBM A2630 accelerator card - the populated
ram was lost and there was difficulty booting from the HDD in 68030
mode. I ended up sueing CBM for the system I had built which was an
A2000 twin Floppy, Dataflyer 2000s with 8 Meg 20 gig HDD scsi ii drive,
A2286 Bridge board and genlock with 5,25 IBM Floppy, CBM/IBM DOS
partition on HDD, - again would not work with 68030 board enabled - had
to work in native 68000 mode, and the CBM A2301 Genlock Card - Quite a
machine had it have worked properly - they ended up paying out with
interest when they wouldn't settle for either an A3000T or A4000-040 the
best they would offer was the A4000-030ec with no SCSI, NO Bridge board,
- so no deal. However if there was no accelerator or a different one
than the Commodore 030 one then the Dataflyer A2000s was brilliant, a
very reliable piece of hardware with the accelerator card removed.

Hope this helps out to update the amiga hardware data base.

Regards

Dominic

_________________
Teil der Amiga-Community


Nach oben
   
Beiträge der letzten Zeit anzeigen:  Sortiere nach  
Ein neues Thema erstellen  Auf das Thema antworten  [ 1 Beitrag ] 

Alle Zeiten sind UTC


Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder


Du darfst keine neuen Themen in diesem Forum erstellen.
Du darfst keine Antworten zu Themen in diesem Forum erstellen.
Du darfst deine Beiträge in diesem Forum nicht ändern.
Du darfst deine Beiträge in diesem Forum nicht löschen.
Du darfst keine Dateianhänge in diesem Forum erstellen.

Gehe zu: 

cron